Haller X2 - Pressing mechanism, swivel, guide plate and tail gate elevation

In this area you will find all the elements of the mechanism in charge of the pressing plate movement (guide plate and swivel) in your Haller X2 compactor.

 

 

 

 

 

 

We can offer you all the components of the collection and pressing mechanism of Haller X2 RCV compactor.

We have the entire structures of the swivel and guide plate, the hydraulic cylinders in charge of it actioning and the different pins, bushings, safety plates or rollers that keep them assembled.

Select the spare parts among the list of references you can find below or click on the menu on your left where your Haller compactor appears so that you could display a list of all the available spare parts for your machine.

If you cannot find on this website the parts you need, please contact our customer service at +34 968 676912 or send us an email to info@teclimur.es and we will help you locate the correct part for your Haller compactor.

!
91107

Complete swivel plate for Haller X2 compactors, manufactured after August 1994

Compatible with Haller original references 101339* / 126495* / 101.339* / 126.495* /101 339* / 126 495*

Applicable to Haller X2 compactors.

It is the lower swivel plate that collects the wastes in the hopper.

Each Haller X2 needs 1 swivel.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91109

ø70x60 mm. height 60 mm. bushing for the swivel articulation in Haller X2 compactors

Compatible with Haller original references 348255* / 125439* / 348.255* / 125.439* / 348 255* / 125 439*

Applicable to Haller X2 compactors.

Bushing for the articulation pin of the swivel-guide plate section in Haller X2 RCV compaction trucks.

Each Haller X2 needs 2 bushings, one on each swivel pivot point.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91108

Guide plate for Haller X2 compactors

Compatible with Haller original references 402066* / 402.066* / 402 066*

Applicable to Haller X2 compactors.

It is the upper press plate on which the swivel that collects the wastes in the hopper is articulated.

Each Haller X2 needs 1 guide plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91116

ø229x60 mm. upper articulation pin with lubrication hose for the guide plate in Haller X2 compactors

Compatible with Haller original references 401049* / 234988* / 5100878* / 401.049* / 234.988* / 510.0878* / 401 049* / 234 988* / 510 0878*

Applicable to Haller X2 compactors.

Upper pin for the rollers on which the swivel-guide plate slides in Haller X2 compactors.

Each Haller X2 needs 2 short bushings.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91110

ø65x60 mm. height 60 mm. expansive bushing for the guide plate upper pin in Haller X1 and X2 compactors

Compatible with Haller original references 348249* / 126273* / 348.249* / 126.273* / 348 249* / 126 273*

Applicable to Haller X2 compactors.

Expansive bushing for the upper pins on which the swivel-guide plate section slides in Haller X1 and X2 compactors.

Each Haller X2 and X1 needs 4 bushings.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91115

ø276x60 mm. lower articulation pin for the swivel and guide plate of Haller X2 compactors

Compatible with Haller original references 401050* / 401.050* / 401 050*

Applicable to Haller X2 compactors.

Lower pin for the rollers on which the swivel-guide plate section slides in Haller X2 compactors.

Each Haller X2 needs 2 long pins.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91111

ø65x60 mm. height 50 mm. expansive bushing for the support of the guide plate pivot point in Haller X1 and X2 compactors

Compatible with Haller original references 348248* / 126272* / 348.248* / 126.272* / 348 248* / 126 272*

Applicable to Haller X1 and X2 compactors.

Casquillo expansivo para los bulones inferiores sobre los que se desplaza el conjunto pala-trineo en compactadores RSU Haller modelo X2.

Each Haller X2 and X1 needs 4 bushings

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91117

ø110x60x70 mm. roller with bushing for the guide plate and swivel in Haller X1 and X2 compactors

Compatible with Haller original references 404657* / 125438* / 5100881* /  404.657* / 125.438* / 510.0881* / 404 657* / 125 438* / 510 0881* 

Applicable to Haller X2 and X1 compactors.

Roller on which the swivel-guide plate section slides in Haller X1 and X2 compactors.

Each Haller X2 needs 4 rollers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91112

Drilled pin for the hydraulic cylinders eye rods of the swivel and guide plate in Haller X2 compactors

Compatible with Haller original references 401027* / 124991* / 5100876* / 401.027* / 124.991* / 510.0876* / 401 027* / 124 991* / 510.0876*

Applicable to Haller X2 compactors.

Pin for the hydraulic cylinders eye rods that activate the swivel-guide plate movement in Haller X2 compactors.

Each Haller X2 needs 8 pins, 2 for each hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91113

Safety plate to secure 91112 pin of the swivel and guide plate hydraulic cylinders in Haller X2 compactors

Compatible with Haller original references 400309* / 124992* / 400.309* / 124.992* / 400 309* / 124 992*

Applicable to Haller X2 compactors.

Safety plate for the pin fitting for the hydraulic cylinders eye rods that activate the swivel-guide plate section movement in Haller X2 compactors.

Each Haller X2 needs 8 safety plates, 2 for each hydraulic cylinder

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91118

Inspection cover for the swivel and guide plate rollers in Haller X1 and X2 compactors

Compatible with Haller original references 100821* / 100.821* / 100 821*

Applicable to Haller X1 and X2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91119

ø80x60x10 mm. felt ring for the swivel and guide plate rollers in Haller X1 and X2 compactors

Compatible with Haller original references 366067* / 126211* / 366.067* / 126.211* / 366 067* / 126 211*

Applicable to Haller X1 and X2 compactors.

Supplementary felt ring for the rollers on which the swivel-guide plate section slides in Haller X1 and X2 compactors.

Cada compactador Haller X2 necesita 2 anillos.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91120

2 mm. equalizer disk for the pin of the guide plate roller in Haller X2 compactors

Compatible with Haller original references 400634* / 400.634* / 400 634*

2 mm. supplementary disk in case that you need to reduce spaces in pins of the rollers on which the swivel-guide plate section slides in Haller X2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91121

3 mm. equalizer disk for the pin of the guide plate roller in Haller X2 compactors

Compatible with Haller original references 400635* / 400.635* / 400 635*

3 mm. supplementary disk in case that you need to reduce spaces in pins of the rollers on which the swivel-guide plate section slides in Haller X2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91123

ø50 mm. articulated joint bearing for the eye rods of the swivel and guide plate cylinders and the ejector cylinder in Haller X2 compactors

Compatible with Haller original references 348036* / 348.036* / 348 036*

Applicable to Haller X2 compactors.

Articulated joint bearing for the eye rods of the hydraulic cylinders that activate the swivel movement, the guide plate and the ejector hydraulic cylinder in Haller X2 compactors.

Each Haller X2 needs 4 bearings of ø50 mm. for the tailgate elevation hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91146

ø55x50 mm. height 30 mm. expansive bushing for the swivel and guide plate hydraulic cylinder in Haller X2 compactors

Compatible with Haller original references 348243* / 219999* / 348.243* / 219.999* / 348 243* / 219 999*

Applicable to Haller X2 compactors.

Expansive bushing for the pins of the 4 hydraulic cylinders that activate the swivel-guide plate section in Haller X2 compactors.

Each Haller X2 needs 8 bushings.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91114

ø74x30 mm. pin for the tailgate elevation hydraulic cylinder in Haller X1 and X2 compactors

Compatible with Haller original references 401030* / 5101059* / 401.030* / 510.1059* / 401 030* / 510 1059*

Applicable to Haller X1 and X2 compactors.

Pin for the eye rods of the hydraulic cylinders that activate the tailgate elevation movement in Haller X1 and X2 compactors.

Each Haller X1 or X2 needs 2 pins for the hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91124

ø30 mm. articulated joint bearing without maintenance for the tailgate elevation cylinder in Haller X2 compactors

Compatible with Haller original references 348033* / 348.033* / 348 033* 

Applicable to Haller X2 compactors.

Joint bearing for the eye rods of the hydraulic cylinders that activate the tailgate elevation movement in Haller X2 compactors.

Each Haller X2 needs 4 joint bearing of ø30 mm. for the tailgate elevation hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91125

ø35x94 mm. welded on plate upper pin for the tailgate elevation hydraulic cylinder in Haller X2 compactors

Compatible with Haller original references 397355* / 397.355* / 397 355*

Applicable to Haller X2 compactors.

Pin for the upper eye rods of the hydraulic cylinders that activate the tailgate elevation movement in Haller X2 compactors.

Each Haller X2 needs 2 equal pins for the tailgate elevation hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91122

ø127x50 mm. double chamfer pin for the pivot point on which the tailgate swings in Haller X2 compactors

Compatible with Haller original references 105040* / 105.040* / 105 040*

Applicable to Haller X2 compactors.

Articulation pin for the upper pivot point from which the tailgate elevation movement swings in Haller X2 compactors.

Each Haller X2 needs 2 equal pins for the tailgate pivot point.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912