Haller X2 - Ejection plate

In this section you will find all the components of the ejection plate, which unloads the hopper in Haller X1 and X2 compactors.

We offer you all the necessary components for the ejection plate repairing in Haller X2 RCV collection trucks.

We have the entire structures of the ejection plate, the wear-out slides on which the ejection plate slides, the different scrapers that prevent the wastes from getting into the telescopic cylinder area, the pressure strips, washers and nuts that keep them all attached.

Select the spare parts among the list of references you can find below or click on the menu on your left where your Haller compactor appears so that you could display a list of all the available spare parts for your machine.

If you cannot find on this website the parts you need, please contact our customer service at +34 968 676912 or send us an email to info@teclimur.es and we will help you locate the correct part for your Haller compactor.

!
91150

Complete ejection plate for Haller X2 and X1 compactors

Compatible with Haller original references 101598* / 101.598* / 101 598*

Applicable to Haller X1 and X2 compactors.

Complete ejection plate to unload the hopper in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 1 ejection plate although its spare parts are sold separately.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91151

250x125x50 mm. sliding block for the ejection plate in Haller X2, X1 and HN Cityloader compactors

Compatible with Haller original references 100323* /124132* / 100.323* /124.132* / 100 323* /124 132*

Applicable to Haller X2 compactors.

Side slides on which the ejection plate that unloads the hopper slide in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 4 slides for the ejection plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91152

1940x40x6 mm. right/left flat steel to fasten the side scraper rubber of the ejection plate in Haller X2 compactors manufactured after 1994

Compatible with Haller original references  104199* / 101269* /104.199* / 101.269* / 104 199* / 101 269*

Applicable to Haller X2 compactors.

Side steel plates to fasten the vertical scrapers of the ejection plate that unloads the hopper in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 2 vertical pressure plates for the ejection plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91153

2142x40x6 mm. upper flat steel to fasten the side scraper rubber of the ejection plate in Haller X2 compactors manufactured after 1994

Compatible with Haller original references 104198* / 101414* /  104.198* / 101.414* / 104 198* / 101 414*

Applicable to Haller X1 and X2 compactors.

Upper steel plate to fasten the horizontal upper scraper of the ejection plate that unloads the hopper in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 1 upper pressure plate for the ejection plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91154

2000x60x20 mm. right/left side scraper strip for the ejection plate in Haller X2 compactors

Compatible with Haller original references 104195* / 104195* / 104.195* / 104.195* / 104 195* / 104 195*

Applicable to Haller X1 and X2 compactors.

Vertical scraper for the ejection plate that unloads the hopper in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 2 vertical scrapers for the ejection plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91155

2170x60x20 mm. upper scraper strip for the ejection plate in Haller X2 compactors

Compatible with Haller original references Haller 104194* / 104.194* / 104 194*

Applicable to Haller X1 and X2 compactors.

Horizontal upper scraper for the ejection plate that unloads the hopper in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 1 upper scraper for the ejection plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91156

A 8.4 washer to fasten the ejection plate scrapers in Haller X2 compactors

Compatible with Haller original references 370252* / 370.252* / 370 252*

Applicable to Haller X1 and X2 compactors.

Washers for the scrapers fastening of the ejection plate that unloads the hopper in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 31 washers to fasten the upper pressure strip of the ejection plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

91157

M8 self-locking nut for the fastening flat steel of the ejection plate scraper in Haller X2 compactors

Compatible with Haller original references 355199* / 355.199* / 355 199*

Applicable to Haller X1 and X2 compactors.

Fastening nuts for the ejection plate scrapers that unloads the hopper in Haller X1 and X2 RCV compaction trucks.

Each Haller X1 or X2 needs 31 self-locking nuts to fasten the strip pressure of the ejection plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912