Geesink - Spare parts for the rear section and press

In this area we offer the pins, bushings and accessories used for the press of Geesink GPM 2 and GPM 3 compactors.

!

We have a large stock of accessories suitable for the pressing system of Geesink GPM II and GMP III RCV compacting systems.

We can offer you the pins, bushings, assembly plates for hydraulic cylinders, safety plates and, ultimately, the different components of the press for Geesink GPM 2 and GPM3 waste compaction trucks.

You can also choose the complete compaction plate or yoke.

Due to the wide variety of spare parts, we recommend you study carefully all the details of every spare part and, if you need, contact us so that we can help you locate the correct reference.

!
45264

Complete yoke for Geesink GPM II and GPM III compactors, XX25 models

Compatible with Geesink original references 224701* / 224697*

 

Applicable to Geesink GPM 2 and GPM 3 compaction trucks.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45366

Left connection adapter for the yoke in Geesink compactors

Compatible with  Geesink original reference 223088*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45437

Extension adapter for the tailgate elevation hydraulic cylinder in Geesink GPM 2 compactors with a high bodywork

Compatible with Geesink original reference 224095*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45789

ø30mm, height 20mm. M8 inner thread, rubber metal buffer for the footboard switch bracket and for the elevation and inclination device in Geesink GEC 2510 bin lifters

Compatible with Geesink original reference 401491 / 401490*

 

Applicable to Geesink GPM 3 and GCP 25

Diameter 30mm, height 20mm. M8

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45368

Assembly washer for the yoke pivot point in Geesink GPM III compactors

Compatible with Geesink original reference  223096*

Applicable to Geesink GPM 3 compactor

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45335

150x80x25 mm. yoke reinforcement metal ring for the swivel hydraulic cylinder in Geesink compactors

Compatible with Geesink original reference 222118*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45423

Curved separating bearing to be installed on the yoke base in Geesink compactors

Compatible with Geesink original reference 223779*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45631

2275 mm. pressure strip for the tightness seal anchoring on the rear gate of Geesink GPM 2 compactors

Compatible with Geesink original reference 288804*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45598

ø55x140 mm. pin with lubrication hose for the swivel hydraulic cylinder in Geesink GPM 2 and GPM 3 compactors

Compatible with Geesink original references 260089* / 223113* / 260088*

 

Applicable to Geesink GPM 2 and GPM 3 compactors

Length 140 mm. Diameter 55 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45382

ø70x228 mm. pin for the lower yoke hinge in Geesink GPM II compactors

Compatible with Geesink original reference 223114*

 

Applicable to Geesink GPM 3 compactor

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45642

M8 30x75 mm. pin for the tailgate elevation hydraulic cylinder hinge in Geesink GPM II compactors

Compatible with Geesink original reference 288860*

 

Applicable to Geesink GPM 2 compactors

Length 75 mm. Diameter 30 mm. Thread M8.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45336

M12 ø40x80 mm. hinge pin for the tailgate upper pivot point articulation and the lower articulation in Geesink GCB 1000 / GEC 2510 bin lifters

Compatible with Geesink original reference 222237*

 

Applicable to Geesink GPM 2 compactors

Pin on which the tailgate is articulated in Geesink GPM 2 compactors to perform the elevation.

Size 80x40 mm. Thread M12.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45345

M12 ø35x125 mm. hinge pin for the two opposite sites of the yoke cylinder in Geesink GPM II and GPM III

Compatible with Geesink original reference 222705*

 

Applicable to Geesink GPM 2 and GPM 3 compactors

Pin size: Diameter 35 mm. Length 125 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45332

ø40x125 mm. M12 hinge pin for the joint of the ejector cylinder with the ejection plate in Geesink GPM II compactors

Compatible with Geesink original reference 222051*

 

Applicable to Geesink GPM 2 compactor

Length 125 mm. Diameter 40 mm.

Pin that connects the ejector plate to the super structure by means of the hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45436

ø30x59 mm. pin for the extension adapter of the tailgate elevation hydraulic cylinder in Geesink GPM II compactors with high bodywork

Compatible with Geesink original reference 224094*

 

Applicable to Geesink GPM 2 compactors

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45334

ø80x335 mm. hinge pin with lubrication hose for the interconnection between the special length yoke and the press plate in Geesink GPM II compactors

Compatible with Geesink original reference 222117*

 

Applicable to Geesink GPM 2 compactors

Diameter 80mm. Length 335mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45383

ø80x290 mm. pin with lubrication hose for the interconnection between the swivel and the yoke in Geesink GPM II and GPM III compactors

Compatible with Geesink original references 223115 / 222115*

 

Applicable to Geesink GPM 2 and GPM 3 compactors

Diameter 80mm. Length 290mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

G12036

ø35x155 mm. pin without lubrication hose for the yoke cylinder in Geesink GPM II compactors

Compatible with Geesink original reference

 

Applicable to Geesink GPM 2 compactors

Length 155 mm. Diameter 35 mm. Thread M12.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

G12035

70x82x40 mm. bushing for Geesink GPM II compactors

Applicable to Geesink GPM 2 compactor

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45666

39x35x50 mm. glacier bushing for the yoke hydraulic cylinder eye rods in Geesink GPM III compactors

Compatible with Geesink original reference 308000*

Applicable to Geesink GPM 3 compactors

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912