Suction system for Schmidt Swingo 200 sweepers

If you are looking for high quality spare parts compatible with the central suction device of the Schmïdt Swingo sweepers, this is the right place to find them.

Here you will find the most common wear-out components for the central suction device of your Schmïdt Swingo sweeper.

We offer the replacement slide set for the suction nozzle, the reinforced suction hoses, the wheels, all of them manufactured in materials highly resistant to abrasion.

You can also buy the rubber mudflaps, the rear boomerang slide and also all the accessories of the suction mechanism of your Schmidt Swingo sweeper.

Select the parts you need from the references listed below, or click on the menu on the left for your sweeper to list the rest of parts available for your machine.

If you cannot find on this web site what you need, feel free to contact us on info@teclimur.com to locate the correct part, or call us at: +34 968676912 and you will receive assistance from a technician.

!
67002

Central slide for the suction nozzle device of Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 15090051*

Metal slide for the suction nozzle sliding in Schmïdt Swingo sweepers.

Each sweeper needs 1 slide for its central position. Made of metal.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67003

Side slide for the suction nozzle device of Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 15090052*

Metal slide for the suction nozzle sliding in Schmïdt Swingo sweepers.

Each sweeper needs 1 slide for its central position. Made of metal.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67009

Clip for the suction hose fastening of Schmidt sweepers

Compatible with Schmïdt original reference 98030080*

For the suction hose fastening in Schmidt sweepers series Swingo.

2 equal clips are required, one at each hedge of the main suction hose.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67010

Rear boomerang slide for the suction mouth sliding in Schmidt Swingo sweerpers

Compatible with Schmïdt original reference 15090019*

Boomerang-shaped slide for the rear side of the suction mouth gliding in Schmidt sweepers series Swingo.

Made of highly resistant plastic materials.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67012

Front rubber flap for the suction mouth in Schmidt Swingo sweepers

Compatible with Schmïdt original references 17039050 /17039090*

Rubber front flap to be installed on the front part of the suction mouth of Schmïdt sweepers series Swingo.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67013

17 mm. rubber flap for the suction mouth in Schmidt SK sweepers

Compatible with Schmïdt original reference 15090139*

Applicable to Schmïdt SK sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67037

Suction hose for Schmidt Swingo 200 sweepers

Compatible with Schmïdt original references 12-17036435 / 1217036435 / 15090128 / 17036435*

Size 1350 x 205 mm.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67062

Articulation pin for the suction mouth in Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 29039137*

Pin for the front part of the sweeper support in Schmïdt Swingo sweepers.

Each sweeper needs 2 pins.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67063

3/4" locknut for the bended connector 63900059 of the suction nozzle central part in Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 97601549*

Locknut for the 90º connector fastening on the central part of the suction mouth in Schmïdt Swingo sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67064

Special washer for the suction mouth in Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 98900927*

Fastening washer for the suction mouth in Schmïdt Swingo 200 sweepers.

Each sweeper needs 3 equal washers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67065

3/4" adapter for the suction nozzle in Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 97600117*

3/4" coupling for the bended coupling connection on the central part of the suction nozzle in Schmïdt sweepers series Swingo 200.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67066

3/4" bended connection element for the suction mouth in Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 97600182*

90º connection element to be fastened on the central part of the suction mouth in Schmïdt Swingo sweepers by means of the adapter reference 67065.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67067

Hydraulic cylinder for the suction mouth gate in Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 1029018-8*

Hydraulic cylinder for the suction door elevation in Schmïdt sweepers series Swingo.

1 hydraulic cylinder is required for the suction mouth.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67068

Nyloc nut for the rubber flap fastening in the suction mouth of Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 98112200*

Special nut for the rubber flap fastening of Schmïdt sweepers series Swingo 200 in the front part of the suction mouth.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67069

M8x35 screw with conic nut and washer for the front rubber flap fastening in the suction nozzle of Schmidt Swingo 200 sweepers

Compatible with Schmïdt original references 1002001-4 /10020014 / 1038999-2 / 10389992*

Screw that fasten the rubber flap of the central part of the suction nozzle in Schmidt sweepers series Swingo.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67070

Fastening plate for the front rubber flap of the suction nozzle in Schmidt Swingo sweepers

Compatible with Schmïdt original reference 17039095*

Drilled metal plate for the front rubber flap fastening in the suction nozzle of Schmïdt Swingo sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67071

Tongue for the front rubber flap fastening in Schmidt Swingo sweepers

Compatible with Schmïdt original reference 17039052*

Curved tongue for the central rubber flap fastening in the front part of the suction nozzle in Schmidt Swingo 200 sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67072

Hinge for the front rubber flap articulation in the suction nozzle of Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 17039061*

Hinge that articulates the front rubber flap of the suction nozzle in Schmidt Swingo 200 sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67073

M6 long nut for the rubber flap fastening in the suction nozzle of Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 15090085*

Each sweeper needs 10 equal nuts for the fastening of the hinge that articulated the front rubber flap in Schmidt Swingo 200 sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

67074

Hat-shaped separating element for the suction nozzle elevation arm in Schmidt Swingo 200 sweepers

Compatible with Schmïdt original reference 17039032*

Top hat-shaped separating element for the pivot points of the hydraulic cylinder that lifts or descends the suction nozzle in Schmidt Swingo 200 sweepers.

6 equals separating elements are required for the suction mouth in Schmidt Swingo 200 sweepers.

Applicable to Schmïdt Swingo sweepers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.