Spare parts for Geesink hopper

In this area we offer all the components used in the hopper of your Geesink GPM 2 and GMP 3 compactor as well as all the suitable spare parts for its maintenance.

We have a large stock of spare parts suitable for the hopper and ejection plate of Geesink GPM II and GMP III RCV compacting systems.

We can offer you the wear out slides of the ejection plate, the tightness seal of the rear door and, ultimately, the different components of the hopper for Geesink GPM 2 and GPM 3 waste compaction trucks.

Due to the wide variety of spare parts, we recommend you study carefully all the details of every spare part and, if you need, contact us so that we can help you locate the correct reference.

 

!
45260

Ejector plate for Geesink GPM II, GPM II and XX25 compaction trucks

Compatible with Geesink original reference 223600*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45343

Metal support for the ejector plate slides in Geesink GPM II compactors

Compatible with Geesink original reference 222601*

Applicable to Geesink GPM 2 compaction truck

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45628

300x95x42 mm. slide for the ejector plate gliding in Geesink compactors

Compatible with Geesink original reference 288610*

Size 300x95x42mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

G11003

Angle for the bin repairing in Geesink compactors

Length 295 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

46225

Locking plate for the hopper in Geesink GPM II compactors

Compatible with Geesink original reference 751510*

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45817

Vertical position tightness seal per meters for Geesink GPM II compactors (4 meters pieces)

Compatible with Geesink original reference 402023*

 

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45865

4.8 x 12 mm. pop rivet for the fastening of the press plate and the tailgate and side gate tightness seals in Geesink GPM 2 compactors

Compatible with Geesink original references 810032 / 810025*

Diameter 4.8 mm. 

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45424

1620 mm.straight clamping strip for the tailgate side tightness seal in Geesink GPM / GCP compactors

Compatible with Geesink original reference 223783*

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

G11029

N8-1/2" threaded screw for the pressure strip fastening in Geesink GPM II compactors

Compatible with Geesink original reference 810050*

 

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45862

Nylon washer for the panel fastening screw reference 45866 in Geesink GPM II compactors

Compatible with Geesink original reference 809004*

 

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45432

Safety support for the tailgate section in Geesink compactors

Compatible with Geesink original reference 223848*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45420

Guide block for the tailgate section in Geesink compactors

Compatible with Geesink original reference 223763*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

G12144

Right hand side upper cover plate for Geesink compactors

Compatible with Geesink original reference 223652*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

G12145

Right hand side lower cover plate for Geesink compactors

Compatible with Geesink original reference 223650*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45428

500 mm. grab handle for the tailgate operator in Geesink compactors

Compatible with Geesink original reference 223821*

Length 500 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45842

2" discharge valve for the hopper evacuation in Geesink compactors

Compatible with Geesink original reference 580101*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45634

Protection support for the amber flashing beacon in Geesink compactors

Compatible with Geesink original reference 288810*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45868

Cleaning shovel for Geesink GPM 2 compactors

Compatible with Geesink original reference 860027*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45369

Left / right cover sheet for the yoke pivot point in Geesink GPM II compactors

Compatible with Geesink original reference 223097*

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

45885

Locking handle for Geesink GPM II bin lifters

Compatible with Geesink original references 907194 / 23250*

Applicable to Geesink GPM 2 compaction trucks

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912