Le ofrecemos repuestos para la placa de la prensa compuesta por la pala y el trineo, y los distintos componentes que componen la sección trasera de los compactadores de residuos sólidos Faun Variopress.

Faun Variopress - Press plate: swivel and guide plate

In this are we offer the spare parts used for the press plate repair in Faun Variopress compactors as well as the right spare parts for the tailgate

!

We offer spare parts for the press plate components: the guide plate and the swivel and all the spare parts for the rear section of your Faun Variopress solid waste compaction trucks.

You can choose the different components: the road rollers on which the press plate slides, slides, pins, bushings, seals, articulated bearings and even the swivel and guide plates themselves.

 

Select the spare parts among the list of references you can find below or click on the menu on your left where your Faun Variopress compactor appears so that you could display a list of all the available spare parts for your machine.

If you cannot find on this website the parts you need, please contact our customer service at +34 968 676912 or send us an email to info@teclimur.es and we will help you locate the correct part for your Faun Variopress compactor.

 

!
55160

Guide plate for the press plate in Faun Variopress compactors manufactured after 1994

Compatible with Faun original references 5202560* / RS0001* / PS421101P* / 1568184*

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55161

Swivel blade for the press plate in Faun Variopress compactors manufactured after 1996

Compatible with Faun original references 5202594* / LS0001* / 5222986E* / PS420201P* / 1545232*

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55162

620 x 707 x 78 mm. support bar for the movement rollers for the guide plate in Faun Variopress compactors

Compatible with Faun original references 5202895* / RS0010* / OD7547*

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55163

50 x 70 x 7 mm. pressure ring for the eye rods of the guide plate cylinder in Faun Variopress compactors

Compatible with Faun original references 5202650* / FM0102*

Size: 70 x 50 x 7 mm.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55164

50 x 70 x 7 mm. pressure ring for the articulation between the swivel and the guide plate in Faun Variopress compactors

Compatible with Faun original references 5202647* / 5241889* / FM0100*

Size: 120 x 74.6 x 11 mm.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55165

105 x 74,6 x 10 mm. outer pressure ring for the articulation between the swivel and the guide plate in Faun Variopress compactors

Compatible with Faun original references 5202648* / 5241885*

Size: 105 x 74.6 x 10 mm.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55166

106 x 72.5 x 7 mm. separating ring for Faun Variopress compactors

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55167

68 x 50 x 8 mm. separating washer for the tailgate articulation in Faun Variopress compactors

Compatible with Faun original reference 1545025*

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55168

85 x 54,9 x 10 mm. outer pressure ring for the assembly of the swivel cylinder pin in Faun Variopress compactors

Compatible with Faun original references 5202649* / 5241886*  / FN0101*

Size: 85 x 54.9 x 10 mm.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55169

Upper separating ring for the press hydraulic cylinder in Faun Variopress compactors manufactured after November 2004

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55170

Pin for the lower articulation between the swivel and the guide plate in Faun Variopress compactors

Compatible with Faun original references 5243751* / FM0457*

Size: 274.5 x 69.7 mm.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55171

Pin for the upper assembly of the guide plate in Faun Variopress compactors

Compatible with Faun original references 5243752* / FM0409*

Size: 227.5 x 70 mm.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55172

110 x 70 x 79.30 mm. outer roller for the guide plate movement in Faun Variopress / Grange compactors

Compatible with Faun original references 5228785* / PS0052*

Size: 110 x 70 x 79.3 mm.

Applicable to Faun Variopress compactors.

Each of the 4 pins that hold the guide plate needs one.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55173

Seal kit for the movement roller of the guide plate in Faun Variopress / Grange compactors

Compatible with Faun original references QD7534* / 70017064*

Each one of the 4 rollers that holds the guide plate needs one seal.

Applicable to Faun Variopress / Grange compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55174

GE50 lower bearing for the eye rod of the swivel movement cylinder in Faun Variopress compactors

Compatible with Faun original references 5069225* / PS4185* / OL7535*

Applicable to Faun Variopress compactors.

Each cylinder has 1 greasable bearing in its eye rod.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55175

GE70 inner bearing for the articulation between the swivel and the guide plate in Faun Variopress compactors

Compatible with Faun original references 5243439* / PS4184* / 9009070105* / OL7561*

Applicable to Faun Variopress compactors.

Each articulation point needs 1 greasable bearing inside it.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55177

Pin for the assembly of the lower eye rod of the swivel hydraulic cylinder in Faun Variopress compactors manufatured after November 2004

Compatible with Faun original reference FM9970*

Size: 123 x 50 mm.

Applicable to Faun Variopress compactors.

Each cylinder eye rod needs 1 pin inside it.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55178

125 x 50 mm. upper pin with lubrication hose for the swivel hydraulic cylinder in Faun Variopress compactors manufactured after 2004

Compatible with Faun original reference FM0098*

Size: 123 x 50 mm.

Applicable to Faun Variopress compactors.

Each cylinder eye rod needs 1 pin inside it.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55188

90 x 74 x 7 mm. seal for the outer pressure ring of the articulation between the swivel and the guide plate in Faun Variopress compactors

Compatible with Faun original references QD0010 / 5240275 / 5241884*

Size: 90 x 74 x 7 mm.

4 seals are required per vehicle.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

55190

70 x 54,9 x 7,5 mm. for the outer pressure ring of the swivel cylinder pin in Faun Variopress compactors

Compatible with Faun original references 5240276 / 5241888 / QD0011 40276*

Size: 70 x 54.9 x 7.5 mm.

Applicable to Faun Variopress compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912